Brake bleeding question.

[Graham.]

Right currently my car is off the ground on rears supported on the beam with arms hanging as low as theyll go.
So, diagonal split system bleed order o/s/r, n/s/f, n/s/r & o/s/f, wont reconnect bias valve spring until brakes bled so valve in theory should remain fully open.
Does the above sound ok?
Also when reconnecting the bias valve spring with the car in the jacked up position is it considered underload or not, if not under should the valve be set so theres minimum gap between adjuster and valve lever?

Cheers.
G.

[Rob.]

The order sounds ok. No idea about setting a bias valve. Probably best to either copy 0002s or 0221s or drive it then adjust it until you get it how you like.